Cernit Pasta Machine

Chromed steel pasta machine is perfect to obtain lowering of 9 different thicknesses. The advantage of this machine is that the thickness will remain the same and can be defined by the user. With this machine, you can get very thin and regular sheets, ranging from 0.3 mm to 2.5 mm depending on the selected notch. Forget about the long efforts required with a simple roller!

Thanks to its very simple use, you can easily flatten the polymer clay, enlarge the clay sheets, mix different colors to create a gradient. The pasta machine can also be used to blend colors evenly and create new effects and colors out of Cernit.

Before starting to put the clay into the machine, knead it to make it softer. If not kneaded enough, the clay will be a little firm for the machine and hard to work. To get very thin sheets, put your clay in the machine several times, reducing the thickness as you go. If the material in the machine is way thicker than the selected thickness, the rolls of the machine could be damaged.

The machine is supplied with a clamp that allows you to attach it to your working table so that you keep your hands free and ensure that the machine will not move an inch.

The use of other materials that are too hard in the machine could damage the rollers. After each use, you can very easily clean your machine. Just pass a simple cloth on the rollers. From time to time, we recommend to disassemble the machine to remove any clay that would have slipped into hidden areas. During this operation, do not use equipment that could damage the machine!

Very easy to transport, the machine's It is dimensions are 21 x 13 x 11 cm. Made in Italy.

Content of the box:

• La Cernit pasta machine
• The clamp
• The crank